Online UPS - Induss Power Series
| INDUSS POWER SERIES ON-LINE UPS | ||
|---|---|---|
|
– Three Phase Input & Three Phase Output |
 |
|
|
– Double conversion on line technology |
||
|
– Static bypass (Optional) |
||
|
– Manual maintenance bypass |
||
|
– Double CPU control |
||
|
– LCD with control panel |
||
|
– Remote management (Optional) |
||
|
– Parallel redundant (Optional) |
||
|
– Self diagnosis |
||
|
– Low noise |
||
|
– High efficiency cuts down your expense |
||
|
– Wide input voltage range |
||
|
– SNMP Card (Optional) |
||
|
Model |
IP 10K |
IP 15K |
IP 20K |
IP 30K |
IP 40K |
IP 60K |
IP 80K |
IP 100K |
IP 120K |
IP 160K |
IP 200K |
|||
|
Capacity |
10KVA | 15KVA | 20KVA | 30KVA | 40KVA | 60KVA | 80KVA | 100KVA | 120KVA | 160KVA | 200KVA | |||
|
Power |
8KW | 12KW | 16KW | 24KW | 32KW | 48KW | 64KW | 80KW | 96KW | 128KW | 160KW | |||
|
Power Factor |
0.8 |
|||||||||||||
| INPUT | Phase |
3 phase 4 wire and ground |
||||||||||||
| Voltage Range |
+/-20% |
|||||||||||||
| Frequency |
45 – 65Hz |
|||||||||||||
| Rectifier |
3 phase 6 pulses |
|||||||||||||
| OUTPUT | Phase |
3 phase 4 wire and ground |
||||||||||||
| Wave form |
Sine wave |
|||||||||||||
| Crest Factor |
3:01:00 AM |
|||||||||||||
| Rated voltage |
380/400/415V optional |
|||||||||||||
| Phase voltage setting |
200 – 244VAC (control panel ) |
|||||||||||||
| Transient response |
+/-5%, 10ms |
|||||||||||||
| Frequency |
50 / 60 Hz |
|||||||||||||
| Frequency stability |
+ / – 0.05% |
|||||||||||||
| Range of phase lock |
Without synchronization: + /- 2% (settable +/-1% on the control panel) |
|||||||||||||
| Total harmonic distortion |
3% ( linear load) |
|||||||||||||
| Short circuit current |
Short current for 0.1s (200% current) |
|||||||||||||
| Overload capacity |
110% /125% /150% rated current 300 min/ 10min /1min |
|||||||||||||
| Battery | Battery |
Maintenance free lead-acid cell |
||||||||||||
| DC Voltage |
360VDC |
384VDC |
||||||||||||
| Max Charge Current |
30A |
|||||||||||||
| Bypass | Type |
Static state + manual maintenance bypass |
||||||||||||
| Input Phase |
3 phase 4 wire and ground |
|||||||||||||
| Type |
Static state + manual maintenance bypass |
|||||||||||||
| Input voltage range |
15% – 25% (the front control panel selectable) |
|||||||||||||
| Input frequency range |
+/-1% ~ +/- 5% the front control panel selectable |
|||||||||||||
| Transfer time | Inverter / bypass transfer switch time(Overload): 0ms inverter / bypass transfer switch time (fault inverter) 1ms | |||||||||||||
| Overload capacity (10 min) |
170% |
180% |
170% |
170% |
170% |
140% |
130% |
125% |
125% |
110% |
100% |
|||
|
Running temperature |
0-40ºC |
|||||||||||||
|
Relative Humidity |
Less than 95% (without condensing) |
|||||||||||||
|
Altitude |
1000m output nominal power (with increase of 100m, it will reduce output of 1%) max 4000m | |||||||||||||
|
Noise at 1 M |
less than 60 dB |
|||||||||||||
| Inverter Efficiency |
92% |
90% |
||||||||||||
|
Degree of protection |
IP20 |
|||||||||||||
|
Applicable Standards |
EN50091-1-EMC EN50091-2liv.A |
|||||||||||||
|
Optional |
Isolating transformer |
|||||||||||||
|
Isolating transformer |
||||||||||||||